Making a Simple DIY Paper Pinwheel (2024)

By

Nora Nalle

Making a Simple DIY Paper Pinwheel (1)

Nora Nalle is a kids' crafts expert, writer, and teacher with almost a decade of experience creating crafts and STEM craft tutorials for children. She was also a craft stylist for for the "All You Frightfully Fun Halloween Handbook," which focuses on kids' Halloween projects.

Learn more about The Spruce Crafts'Editorial Process

Updated on 09/09/20

Making a Simple DIY Paper Pinwheel (2)

Project Overview

Paper pinwheels are versatile craft that is easy enough for children can make with little supervision and lovely enough to add whimsy to any event with DIY decor. This original fidget spinner can be made withany type of paper you have available.

Paper pinwheels are a great way for budding scientists to test and explore the power of breath and air! The stronger your breath, the faster they will spin. As a parent/educator, allow these pinwheels to provideSTEM supportwhile you talk to kids about wind turbines, windmills, and renewable energy.​​

However, if you do not have children, these pinwheels are an excellentDIY project for decorating baby showers, adding a fun touch to a brunch buffet, and could even be a lovely addition to a wedding.

What You'll Need

Equipment / Tools

  • Scissors
  • Pencil
  • Ruler (optional)

Materials

  • 1 piece Square-shaped paper
  • 1 Straw
  • 1 Pushpin
  • Masking tape

Instructions

  1. Draw Lines

    Using a ruler,mark the center of your square paper with a pencil. If you do not have a ruler, eyeball the center point. Next use your ruler to draw a diagonal line from each corner of the paper, halfway to the center dot you just made.

    Tip

    If you are using printed paper where one side is white and the other has a pattern, make sure you draw the lines on the white side of the paper.

    Making a Simple DIY Paper Pinwheel (3)

  2. Cut Down the Lines

    Use the scissors to cut down the diagonal lines that you just marked on your paper.

    Making a Simple DIY Paper Pinwheel (4)

  3. Fold and Pin

    Fold every other point into the center dot and put a pushpin through the paper. This step can be tricky because the points like to escape if you are not holding them tight, so patience is key.

    Making a Simple DIY Paper Pinwheel (5)

  4. Attach to Straw

    Hold the pushpin with gathered points in one hand tightly and use your other hand to push the remainder of the pin through a straw. We used paper craft straws for these pinwheels but you could also attach your pinwheel to a plastic straw or a pencil. Once your pushpin is throughthe straw, use a little bit of masking tape to make sure no little fingers get stuck by the pin.

    Making a Simple DIY Paper Pinwheel (6)

Making a Simple DIY Paper Pinwheel (2024)

FAQs

How do you make a simple paper spinner? ›

Steps:
  1. 1 For each Paper Spinner, trace 2 circles around the bottom of a large circular object onto construction paper.
  2. 2 Draw designs inside the circles with markers and colored pencils.
  3. 3 Cut out circles with scissors.
  4. 4 Place a circle onto a piece of scrap cardboard and trace.

How do you make a folded pinwheel? ›

How to make a paper pinwheel:
  1. Fold the paper diagonally in half and cut from the corners towards the center. Then fold four corner points towards the center.
  2. Insert a thumbtack through the center and pin it to the back on a stick or twig.
  3. Glue a pretty button or bead onto the thumbtack.

How do I keep my pinwheels from getting soggy? ›

Store any leftover pinwheels in an airtight container for up to two days. Any longer and pinwheels tend to get soggy.

What can I use instead of push pins? ›

Typically staples can be used for the same purpose as pins or tacks; but must be taken out with care when removing.

How do you make a spiral wind spinner out of paper? ›

How to Create This Paper Plate Wind Spinner With Your Preschooler
  1. Color your paper plate in a rainbow pattern.
  2. Trace a spiral, making sure the middle is wide.
  3. Cut along the spiral.
  4. Punch a hole in the middle to loop string through to hang. ...
  5. Add a string to the middle, for hanging up.

Top Articles
Latest Posts
Article information

Author: Gregorio Kreiger

Last Updated:

Views: 5698

Rating: 4.7 / 5 (57 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Gregorio Kreiger

Birthday: 1994-12-18

Address: 89212 Tracey Ramp, Sunside, MT 08453-0951

Phone: +9014805370218

Job: Customer Designer

Hobby: Mountain biking, Orienteering, Hiking, Sewing, Backpacking, Mushroom hunting, Backpacking

Introduction: My name is Gregorio Kreiger, I am a tender, brainy, enthusiastic, combative, agreeable, gentle, gentle person who loves writing and wants to share my knowledge and understanding with you.