Keeping your popovers from deflating (2024)

FAQs

Keeping your popovers from deflating? ›

But if you want the popovers to hold their shape longer without deflating and settling quite as much, bake them for an additional 5 minutes (for a total of 40 minutes) IF you can do so without them becoming too dark. This will make them a bit sturdier, and able to hold their “popped” shape a bit longer.

If your popovers lose volume when they come out of the oven, they are probably underbaked. When these airy baked goods aren't cooked enough, too much steam stays trapped inside. That moisture condenses once they're removed from the oven, causing them to collapse.

Preheating your oven to the correct temperature is probably the most important thing you can do to ensure popover success. The hotter your oven, the higher your popovers will rise.

There can be a few different things that can mess up the rise of popovers. Preheat the oven to 425 with the pan preheating in the oven. When baking don't open it again until they're done. If you open the oven door the temperature inside can drop too quickly and the popovers will not rise properly.

Because popovers rely on steam to rise — as opposed to baking powder, baking soda, or yeast — you want your batter warm when entering the oven. This King Arthur Flour article says it best: “The warmer your batter going into the oven, the more quickly it'll produce steam: simple as that.”

But if you want the popovers to hold their shape longer without deflating and settling quite as much, bake them for an additional 5 minutes (for a total of 40 minutes) IF you can do so without them becoming too dark. This will make them a bit sturdier, and able to hold their “popped” shape a bit longer.

Let the Batter Rest

3) Allow the batter to sit at room temperature for 1 hour before baking or, preferably. cover and refrigerate it for 24 up to 48 hours. Allow it to come to room temperature.

Remove from oven:

Popovers lose their crunch if they linger in the pan, so turn them out on a wire rack immediately and poke a small opening in the side of each with a paring knife to let the steam escape. Serve right away.

A popover pan should be greased. I prefer to use melted butter, but oil or nonstick spray would work too. Greasing the pan ensures that the finished popovers don't stick and promotes browning on the exterior of the popover. After you've greased your pan, place it into the oven while it preheats.

Why aren't my popovers airy? ›

Dense popovers (either from not rising or not getting nice hollows inside) can result from a couple things but usually it is by either not starting with room temperature eggs and milk, not preheating the popover pan, not using a quality popover tin, and/or making too thick of a batter.

Seeking Optimal Lift and Crispness

Not only were popovers made with bread flour about 30 percent taller than those made with all-purpose flour, but their higher walls were also thinner, making them a bit more crisp, and that crispness held up as they cooled. Bread flour was in. Next up: the milk.

There's just one thing that will make the popovers better, and that's time. The batter needs time to rest before baking so that it creates a more tender popover in the end. So, cover the batter and pop it into the refrigerator for at least an hour, but preferably overnight.

Popover pans are designed to convey heat directly to the batter, which is quite wet. As the batter bakes, that heat turns the moisture into steam, causing the popovers' dramatic rise. The deep cups of a popover pan give the batter plenty of room to rise, and provide support for the sides of the popovers as they do so.