Homemade Fudge Mini-Series Blog 2 - Fudge Not Setting Properly (2024)

Homemade Fudge Mini-Series Blog 2 - Fudge Not Setting Properly (1)

We’ve all been there. You’re in the kitchen, following a Traditional Fudge Recipe step by step, measuring out all the ingredients as you go, doing everything the recipe tells you. You finish making your Fudge and you leave it to cool before you beat it with a wooden spoon, however, your Fudge is not setting like the recipe says it should.

What equipment do you need to make Homemade Fudge?

First of all, it’s important to understand that if you use the wrong equipment when making Homemade Fudge, it may impact the overall quality! To effectively make delicious Homemade Fudge, you’ll need:

1. A heavy-bottomed pot with high sides
2. A wooden spoon (we use silicon but it has to be able to withstand temperatures of up to 260 degrees Fahrenheit)
3. A parchment-lined baking tray
4. A sugar thermometer or a jug of cold water
5. Patience and lots of it!

Why has my Fudge not set?

The main reasonis that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That’s why we recommend investing in a sugar thermometer. Another reasonyour Fudgeis not settingis that the ratio of liquid to sugaris too high.

How long does it take Fudge to set?

It usually takes around 3 hours for Fudge to fully set. Therefore, if you have followeda traditional Fudge recipe correctly and boiled your Fudge to the optimum temperature, once you have beaten your Fudge it will take around 3 hours until it is fully set. When you are making Fudge, you must be patient!

What to do if your Fudge doesn’t set?

The good news is that you’ve probably made an amazing thick Fudge sauce! You could use your sauce to pour over ice cream or if you wanted it a little thinner, add some heavy cream and reheat the sauce until it has all melted through.

Homemade Fudge Mini-Series Blog 2 - Fudge Not Setting Properly (2)

We hope you enjoyed the second blog in our Homemade Fudge mini-series. Leave us a comment below, we’d love to hear from you!

Homemade Fudge Mini-Series Blog 2 - Fudge Not Setting Properly (2024)

FAQs

Homemade Fudge Mini-Series Blog 2 - Fudge Not Setting Properly? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

Why is my fudge not setting properly? ›

Why is my fudge not setting? It sounds like your fudge simply wasn't heated enough. ... If it's overcooked (resulting in grainy fudge) or undercooked (resulting in poor setting) all you really need to do is add a bit of cream, reheat the fudge to the target temperature, and let it set again.

How to fix fudge that is too runny? ›

If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream. Stir the fudge as it heats, but only until the sugar in the chocolate is completely melted again.

Why won't my 3 ingredient condensed milk fudge set? ›

This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool. Heat in 30-second bursts in the microwave, stirring well between each to ensure everything is melting evenly.

Can I freeze fudge to make it set? ›

We like to set this fudge in the freezer to make it quicker! Once you add the fudge to your pan it will need just 30 minutes in the freezer to set.

How do you fix fudge that didn't harden? ›

OPTION 2) Freeze it overnight. Cut it into squares. Cover each square thickly in melted chocolate, ensuring no part of the fudge is exposed. Cross your fingers and hope that the chocolate sets firmly before the fudge starts to thaw, and later impress your friends as you present them with your soft-centred chocolates.

Should you stir fudge while it's boiling? ›

You should mix the cream, butter, and sugar when making your fudge, but put down the spoon once it has reached its boiling point. Stirring while your sugar mixture is boiling will only form sugar crystals and make your fudge crunchy rather than silky smooth.

How much cornstarch to thicken fudge? ›

If you do not want your fudge to be overly sweet, you can combine 1 tbsp corn starch with 1 tbsp water and slowly mix into your fudge mixture. This should allow your fudge to thicken, because cornstarch is a thickeneing agent in desserts.

Do I put fudge in the fridge to set? ›

Let the fudge rest at room temperature for 15 minutes before placing in the refrigerator, uncovered. Refrigerate until the fudge is firm, about 2-3 hours (or overnight), before slicing and serving.

How do you add moisture to fudge? ›

Cut the fudge into small pieces around one inch and put it on the plate and place each fudge with the distance in between. Keep a bowl of water inside the microwave along with the fudge to create moisture for the pieces to inhale. Next, microwave the fudge pieces for just 10 seconds.

What makes fudge firmer? ›

Monitor the Temperature with a Candy Thermometer

If you end up with soft fudge that turns into a puddle in your hands or hard fudge that is a bit reminiscent of a crunchy candy, improper temperature is likely to blame. If you don't heat your fudge to a high enough temperature, you'll end up with a soft product.

What causes fudge to be too soft? ›

there is too much leftover water in the syrup and the resulting fudge is soft. To save the fudge, put it in a saucepan with 15 to 30 ml (1 or 2 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil until the thermometer reaches 114 to 115 °C (237 to 239 °F).

What gives fudge its firm texture? ›

Tiny microcrystals in fudge are what give it its firm texture. The crystals are small enough, however, that they don't feel grainy on your tongue, but smooth. While you ultimately want crystals to form, it's important that they don't form too early.

How to tell if fudge is bad? ›

If fudge experiences a change in temperature, it can melt or develop a slimy texture on the surface. If it is exposed to air, it can dry out and become hard. Specific add-ins to fudge have the potential to grow mold or give off a bad odor, and at that point, the fudge should be avoided.

Is it better to freeze or refrigerate fudge? ›

So to recap, it's best to store proper fudge at room temperature. Keeping it in the fridge takes out all its moisture, drying it out. Homemade fudge is best in the fridge. No matter where you store it, the goal is to protect the fudge from exposure to the elements so airtight containers are best!

How long does it take for fudge to set? ›

Proper fudge will set after sitting at room temperature for about 4 hours. Understand that cooking the fudge properly is the skirmish before the war. The real test of your mettle will occur when you beat the fudge, and learn to master the fine art of turning and pouring. And if it doesn't work out it's okay!

How long does it take for fudge to fully set? ›

Proper fudge will set after sitting at room temperature for about 4 hours. Understand that cooking the fudge properly is the skirmish before the war. The real test of your mettle will occur when you beat the fudge, and learn to master the fine art of turning and pouring. And if it doesn't work out it's okay!

Why is my fudge drying out? ›

Fudge is best stored at room temperature for 2 to 3 weeks wrapped up in its original wax paper. NEVER REFRIGERATE your fudge as this will draw out the moisture and leave you with dry, crumbly fudge.

What is the soft ball stage of fudge? ›

making of fudge

termed in kitchen parlance the soft ball stage, that point between 234 and 240 °F (112 and 115 °C) at which a small ball of the candy dropped in ice water neither disintegrates nor flattens when picked up with the fingers.

Top Articles
Latest Posts
Article information

Author: Edmund Hettinger DC

Last Updated:

Views: 5985

Rating: 4.8 / 5 (58 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Edmund Hettinger DC

Birthday: 1994-08-17

Address: 2033 Gerhold Pine, Port Jocelyn, VA 12101-5654

Phone: +8524399971620

Job: Central Manufacturing Supervisor

Hobby: Jogging, Metalworking, Tai chi, Shopping, Puzzles, Rock climbing, Crocheting

Introduction: My name is Edmund Hettinger DC, I am a adventurous, colorful, gifted, determined, precious, open, colorful person who loves writing and wants to share my knowledge and understanding with you.